RMP*Comp

Back

Errors Found

No errors found

Chemical Information

Chemical Name: Crotonaldehyde

CAS Number: 4170-30-3

Chemical Type: Toxic Liquid

Scenario type:

Worst-case Alternative

Release rate calculation:

User-specified Estimated

Storage type:

Hole or puncture area:

Height of liquid column above hole:

Storage pressure:

(absolute)

Initial operational flow rate:

Cross-sectional area of pipe:

Operational pipe pressure:

(absolute)

Change in pipe elevation:

Release rate:

per

Release duration:

minutes

Quantity released:

Surrounding terrain type:

Urban (many obstacles in the immediate area)
Rural (terrain generally flat and unobstructed)

Liquid temperature:

Mitigation measures

Check the checkbox(es) representing mitigation measure(s) in place in your process, if any.

Release into diked area:

Diked area:

Dike height:

Release into building:

Floor area:

$If you're using an active mitigation measure (such as water spraying or foam coverings), use test data, manufacturer's design specifications, or your own experience to estimate the fraction of the material that is not released because of your measure. This estimate must be a number between 0 and 1. For example, if the measure prevents one-tenth of the material from being released, your estimate would be 0.1. Note that RMP*Comp assumes that any active mitigation is applied immediately at the time of release.$ Active mitigation to reduce release rate:

Fractional reduction:

(Type in a value between 0 and 1)

RMP*Comp